RS485/Analog Datalogger (MacSync) Introduction
Designed for seamless integration, MacSync supports connectivity with both RS485 & Analog sensors, making it adaptable to a wide variety of systems and…
RS485/Analog Datalogger (MacSync) Specifications
The range depends on several factors such as environment, antenna, frequency band, and power settings.
RS485/Analog Datalogger (MacSync) Power Options
RS485/Aalog Datalogger (MacSync) Power Options — MacSync devices, including all Maya sensor nodes (CO2, temperature, humidity, air pressure, light, PM2.5…
RS485/Analog Datalogger (MacSync) What's in the Box?
RS485/Aalog Datalogger (MacSync) Box Contains — Make sure box contains following items before installations
RS485/Analog Datalogger (MacSync) Dimensions
RS485/Aalog Datalogger MacSync Dimensions — MacSync features a sleek 152 X 43 X 63 mm form factor for easy installation in space-constrained environments.
RS485/Analog Datalogger (MacSync) Basic Settings
Set the MacSync datalogger's basic settings in the Maya app: device name, heartbeat interval and Reminisce data export.
RS485/Analog Datalogger (MacSync) LoRaWAN Settings
Configure LoRaWAN on the MacSync datalogger in the Maya app: keys and identities, key regeneration, class, frequency, ADR and confirmed messages.
RS485/Analog Datalogger (MacSync) RS485 Configuration
Set up RS485 Modbus sensors on the MacSync datalogger in the Maya app: power output, sensor warm-up time, baud rate, parity and RS485 field setup.
RS485/Analog Datalogger (MacSync) Analog Settings
Set up analog sensors on the MacSync datalogger in the Maya app: power output, sensor warm-up time, sensor type and analog channel configuration.
RS485/Analog Datalogger (MacSync) LoRaWAN Network Health
Check MacSync datalogger LoRaWAN network health in the Maya app: run a network test and read uplink status, spreading factor, SNR and RSSI.
RS485/Analog Datalogger (MacSync) How to Set Triggers
RS485/Aalog Datalogger How to Set Triggers? — You can configure the device to automatically send an uplink when a specific sensor value crosses a defined…
RS485/Analog Datalogger (MacSync) Data Sampling & Uploading
RS485/Aalog Datalogger Data Sampling & Uploading — Macnman RS485/Aalog Datalogger(MacSync): Data Sampling & Upload Timings, Data Sampling Frequency, How…
RS485/Analog Datalogger (MacSync) Security & Device Sharing
RS485/Aalog Datalogger Security & device sharing — Control who can access and configure the device via the Maya app by selecting a security level:
RS485/Analog Datalogger (MacSync) Firmware Updates
RS485/Aalog Datalogger (MacSync) Firmware Updates — Keep your Macnman devices secure and up to date with the latest firmware releases.
RS485/Analog Datalogger (MacSync) Reset Device
Reboot or factory reset the MacSync RS485 and analog LoRaWAN datalogger from the Maya app, with a video demo and step-by-step guide.
RS485/Analog Datalogger (MacSync) LNS Registration
RS485/Aalog Datalogger (MacSync) LNS Registration — You can register your device using either manual entry or QR scan.
RS485/Analog Datalogger (MacSync) Configuration using Server
Configuration using Server — Use FPort = 08 for registers & FPort = 09 for coils Macnman RS485/Aalog Datalogger(MacSync) documentation.
RS485/Analog Datalogger (MacSync) Mounting Options
RS485/Aalog Datalogger (MacSync) Mountings — Macnman RS485/Aalog Datalogger(MacSync): Wall Mounting, Pole Mounting.
RS485/Analog Datalogger (MacSync) FAQs
RS485/Aalog Datalogger (MacSync) FAQs — Important Tip: Double-Check Battery Polarity