Skip to main content

WiFi Datalogger (MacSync) How to Set Triggers

WiFi Datalogger (MacSync) How to Set Triggers? — You can configure the device to automatically send an uplink when a specific sensor value crosses a…

Settings Triggers​

trigger uplinks

You can configure the device to automatically send an uplink when a specific sensor value crosses a defined threshold.

  • Select Trigger 1 or Trigger 2 from the dropdown.
  • Choose the field number (sensor/data field) to monitor.
  • Set the minimum and maximum threshold values.
  • The device will send an uplink whenever the selected field value goes outside the defined range.
Last updated on