# WiFi Datalogger (MacSync) How to Set Triggers

URL: https://www.macnman.com/docs/wifi/datalogger-wifi/maya_tigger_configuration
Section: User Manual › Wifi › Datalogger Wifi

## Settings Triggers

![trigger uplinks](/img/mayascreens/tiggerset.svg)

You can configure the device to automatically send an uplink when a specific sensor value crosses a defined threshold.

- Select **Trigger 1** or **Trigger 2** from the dropdown.
- Choose the **field number** (sensor/data field) to monitor.
- Set the **minimum and maximum threshold values**.
- The device will send an uplink **whenever the selected field value goes outside the defined range**.

## Related Resources

- Datasheet: [MacSync-WX1-PO RS485 and analog to Wi-Fi data logger datasheet](/product/wifi/dataloggers/macsync-w-power-operated-x-two)
- Datasheet: [MacSync-WX1-BO battery-operated RS485 and analog to Wi-Fi data logger datasheet](/product/wifi/dataloggers/macsync-l-std-battery-operated-gen-one)
- Start of this manual: [WiFi Datalogger (MacSync) Introduction](/wifi/datalogger-wifi/macsync_rs485_wifi_introduction)
- Help: [Contact Macnman support](/help/help)