# Weather Station Mounting Options

URL: https://www.macnman.com/docs/lorawan/sensors-lorawan/weather-station6in1/macsync-lwt1-mounting
Section: User Manual › Lorawan › Sensors Lorawan › Weather Station6in1

## Wall Mounting

![baud rate](/img/datalogger/wallone.webp)

![baud rate](/img/datalogger/walltwo.webp)

![baud rate](/img/datalogger/wallthree.webp)

**Apply the Reference Tape**
- Take the provided white tape (with two pre-marked reference holes) from the box and stick it onto the wall where you plan to install the sensor. This will serve as a drilling template.

**Drill Mounting Holes**
- Drill the holes as per the markings on the tape to ensure perfect alignment.

**Fix the Mounting Bracket**
- Screw the bracket securely to the wall using the drilled holes.

**Mount the Sensor**
- Slide the MacSync sensor downward into the bracket until it clicks and locks in place.

**Secure the Sensor (Optional)**
- For additional security, use the extra screw holes on the opposite side to further fasten the sensor.

<div class="faint-line"></div>

## Pole Mounting

![baud rate](/img/datalogger/pole_mounting.webp)

**Detach the Mounting Clip**
- Remove the mounting clip from the MacSync device.

**Insert Zip Ties**
- Thread metal or plastic zip ties through the highlighted mounting holes on the clip.

**Position on Pole**
- Place the MacSync (with clip and zip ties) against the pole at the desired height.

**Secure the Device**
- Wrap the zip ties tightly around the pole and pull until the device is held firmly in place.Both plastic and stainless steel  zip ties are compatible.

## Related Resources

- Datasheet: [MacSync LWS X2 LoRaWAN 6-in-1 weather station datasheet](/product/lorawan/sensors/weather-stations/macsync-l-six-in-one-weather-station-x-six)
- Start of this manual: [Weather Station Introduction](/lorawan/sensors-lorawan/weather-station6in1/macsynclw6_introduction)
- Setup shared by all sensors: [Common LoRaWAN sensor settings](/lorawan/sensors-lorawan/common-lorawan-settings/maya_configuration_led_status_common)
- Help: [Contact Macnman support](/help/help)